Vortex Radar

How to Set Up and Configure your Uniden R7 Radar Detector

Let’s take a look at how to use your new Uniden R7, what all the buttons and menu options do, and how to configure your R7 for optimal performance and minimal false alerts.

Purchase a Uniden R7 here.

This guide is current as of firmware 1.35. You can download the latest firmware here. Uniden continues to update and improve the R7 and as features are added or changed, this guide will be updated accordingly. The Uniden R7 manual is also an excellent resource. This guide will cover additional information, plus I will keep updating it as settings change.

Uniden R7 Buttons & Functions

R7’s Top Buttons

  • MenuShort Press: Enter settings menu
    • Short Press in Menu: Change / Activate setting
  • – ButtonShort Press: Lower volume
    • Short Press in Menu: Previous menu option
    • Long Press in Menu: Scroll through previous menu options
  • + ButtonShort Press: Raise volume
    • Short Press in Menu: Next menu option
    • Long Press in Menu: Scroll through next menu options
  • Power ButtonLong Press: Turn power on or off

R7’s Side Buttons

  • Mute / DimPress during an Alert: Mute alert
    • Double press during an Alert: Create GPS lockout, remembering this false alert so it automatically mutes it in the future
    • Long Press: Change display brightness
  • MarkShort Press: Create GPS Mark so you get alerted every time you come by this area, useful for school zones, common speed trap locations, etc.
    • Short Press during a Marked location alert: Delete GPS Mark
    • Long Press: Bring up option to clear all GPS Marks (press again to confirm)

Uniden R7 Settings & Menu Options

Menu

Choose if you want the menu to only show a few basic options, or if you want to unlock every option available.

Basic: Simplified menu option list, shows only the following settings:

  • Highway / Advanced / City
  • X / K / Ka percentages (in Advanced)
  • Speed Camera On/Off
  • Speed C Range
  • Redlight Camera On/Off
  • RLC Quiet Ride Speed
  • Voice On/Off
  • Ka Frequency Voice On/Off
  • X Band On/Off
  • K Band On/Off
  • Ka Band On/Off
  • Laser On/Off
  • MRCD On/Off
  • Display Mode
  • Scan Icon On/Off
  • Display Mode
  • Alert Display Mode
  • Speed Unit
  • Auto Mute On/Off
  • Auto Mute Volume
  • Quiet Ride
  • Quiet Ride Beep Volume
  • Limit Speed
  • Factory Reset
  • Delete All Mute
  • Delete All Auto
  • Delete All User
  • SW Version
  • DB Version

Expert: (Default) Gives you access to every single menu option available. It adds the following options to the Basic menu:

  • Rear Balance
  • GPS On/Off
  • K POP On/Off
  • Ka POP On/Off
  • K Filter On/Off
  • Ka Filter On/Off
  • TSF On/Off
  • K Block 1 On/Weak/Mute/Off
  • K Block 2 On/Weak/Mute/Off
  • K Narrow / Wide / Extended
  • Ka Narrow / Wide / Segmentation
  • MRCD / Ka / Signal Priority
  • Mute Memory X/K / Ka/MRCD
  • Auto Mute Mem On/Off
  • All Threat On/Off
  • Display Color
  • Arrow Color
  • Band Color
  • X Band Tone
  • K Band Tone
  • MRCD Tone
  • Ka Band Tone
  • Ka Bogey Tone
  • Laser Tone
  • Rear K Mute
  • Dark Mode
  • Auto Dim
  • MRCD Quiet Ride On/Off
  • Time Zone
  • DST
  • Battery Warning
  • Battery Saver
  • Self Test
  • Memory Quota

Note: The MRCD options only show up when MRCD is enabled.

Highway / City / Advanced

Adjust the sensitivity of the radar detector.

  • Highway: (Default) Full sensitivity on all radar bands.
  • City: K Band sensitivity is dropped to 10%, greatly reducing false alarms at the expense of range. Here’s some Highway vs. City Mode testing.
  • Advanced: Individually adjust the sensitivity of the three different radar bands. Choose between 30% – 100% sensitivity in 10% increments.
    • X Band
    • K Band: A popular choice here is to dial back the K band sensitivity to cut down on falses.
    • Ka Band

Note: Switching to Advanced mode only activates the ability to individual adjust the sensitivity of the different radar bands. It does not enable any other advanced features.

Rear Bal

This setting allows you to better balance the rear antenna’s sensitivity in case you get excessively long alerts from behind.

The rear bal option will dial back the detector’s sensitivity on all bands relative to the detector’s set sensitivity (not its max capable sensitivity.)

For example, let’s say you set the detector to Advanced Mode with K band at 70%, Ka band at 100%, and set Rear bal to 50%. The rear antenna’s sensitivity on K band will be set to 50% of 70% or 35%. The rear antenna’s sensitivity on Ka band will be set to 50% of 100% or 50%.

  • 30% – 100% in 10% increments

GPS

Enable the different GPS related features and options like GPS lockouts, low speed muting, redlight camera alerts, etc.

The GPS features are incredibly useful so it’s recommended to definitely leave this on. If you turn this off, the GPS-related options will disappear out of the menu.

  • On (Default)
  • Off

Speed Camera

Notifies you when you approach speed cameras. It will also alert while you are above the speed threshold where the camera issues tickets.

  • On (Default)
  • Off

Note 1: These are GPS-based notifications that come from the downloadable database, separate from radar or laser alerts. The latest database generally comes packaged with the latest firmware.

Note 2: These alerts always occur even if the speed cameras only operate at certain times of the day such as in school zones.

Speed C Range

Choose the distance you’d like the detector to alert you to speed cameras (or redlight cameras).

  • 1000 ft. / 300 m (Default)
  • 2000 ft. / 600 m
  • 2500 ft. / 760 m
  • 3000 ft. / 900 m
  • Auto
  • Off

Auto mode applies just to speed cameras and varies your alert distance based on the speed limit threshold in the speed camera.

  • Speed limit 50 or 60 km/h: Alert range 600m
  • Speed limit 70 or 80 km/h: Alert range 700m
  • Speed limit 100, 110, or 120 km/h: Alert range 800m

Redlight Cam

Notifies you when you approach redlight cameras.

  • On (Default)
  • Off

Note 1: Like speedcam alerts, these are GPS-based notifications, not radar or laser based alerts.

Note 2: The RLC alerts happen whenever you pass through an intersection with an RLC, even if the cameras only monitor one or two directions of travel.

RLC Q-Ride

Mute redlight camera alerts on nearby surface streets as you’re driving down the highway. This way you only get alerts when you’re driving on slower city streets. Think of it as high speed muting. Here you can select the maximum speed that you’ll still get RLC alerts.

  • 50 – 85 MPH or 80 – 140 km/h
  • Off (Default)

Voice

Enable voice alerts for radar or laser signals (ie. “Ka Band”), direction (“Front,” “Side,” or “Rear”), as well as for the different menu options.

  • On (Default)
  • Off

Ka Frequency Voice

Verbally announce the exact frequency of the Ka band radar signal (ie. 34.759) to give you more information about the radar gun being used, without having to look up at the detector. Also handy for logging the exact frequencies on your dashcam footage. 🙂

  • On
  • Off (Default)

X Band

Enable or disable X band detection. X band is actively used in OH and southern NJ, but mostly phased out of the rest of the country.

  • On
  • Off (Default)

K Band

Enable or disable K band detection. K band is actively used throughout most of the country.

  • On (Default)
  • Off

Ka Band

Enable or disable Ka band detection. Ka is actively used all over the country and when your detector goes off to Ka, it’s almost always a legitimate alert.

  • On (Default)
  • Off

Laser

Enable or disable Laser detection. Laser detection is of little practical value because even if your R7 does go off (and often times it won’t because a laser beam is so thin), the officer already has your speed. For proper laser protection, I recommend pairing the AntiLaser Priority laser jammer with your R7.

  • On (Default)
  • Off

K POP

Enable detection of K band POP detection. This is essentially unused in practice and it’s recommended to leave this off.

  • On
  • Off (Default)

MRCD

Detect the MultaRadar CD and CT which are low powered radar guns in use in a few state and provinces in North America. MultaRadar guns are in use in Alberta, Quebec, Chicago, NYC, and in Maryland near Washington D.C.

Enabling MRCD also helps to better filter out BSM falses from Mazda CX-5’s. However, turning this on will introduce additional MRCD falses so you may want to consider enabling MRCD GPS lockouts as well as MRCD Quiet Ride to help deal with the MRCD falses.

  • On
  • Off (Default)

Note 1: Not every MRCD alert is actually a legitimate MultaRadar source. False MRCD alerts from BSM’s or auto door openers can and will happen.

Note: The R7 will alert to both legit MRCD and MRCT sources as MRCD.

Ka POP

Detect 67ms Ka band POP radar. This form of radar is essentially unused so it’s recommended to leave this off for improved performance and reduced false alerts.

  • On
  • Off (Default)

K Filter

Filter out many sources of K band false alerts such as many (but not all) cars with blind spot monitoring radar systems.

  • On (Default)
  • Off

Ka Filter

Filter out false alerts on Ka band. False Ka alerts are rare so people generally leave this off since you typically get better performance with it off, though I haven’t seen any Ka filter tests done yet to confirm.

  • On
  • Off (Default)

TSF

Traffic sensor filter designed to filter out traffic sensors on the sides of some highways that blast K band. If you get repeated K band alerts on your R7 on the highway that aren’t coming from nearby vehicles, turn on TSF.

  • On
  • Off (Default)

Note: I have also found TSF to be helpful at reducing BSM falses too. Testing has found that there is no delay-based performance penalty with this implementation of TSF so I generally recommend turning this on either way to help quiet the detector down.

K Block 1

This is essentially your Honda / Acura BSM filter. Those false alerts are extremely common and extremely difficult to filter out, so Uniden has given us several different notch filters to filter out false alerts between 24.194 – 24.204, effectively filtering out Honda / Acura falses. It also applies to some other vehicles like Chrysler Pacificas.

  • On: Filter out all signals 24.199 +/- 5 MHz (Default)
  • Weak: Filters out only weak signals 24.199 +/- 5 MHz
  • Mute: Audibly mute all signals 24.199 +/- 5 MHz
  • Off: Disable K Block 2

I personally prefer the Weak option since it seems to do a good job of completely filtering out weak BSM’s while still alerting to stronger signals in this frequency range like police radar guns at a distance.

K Block 2

This is similar to K Block 1, but it applies to 24.168 +/- 2 MHz which helps tackle BSM falses from Hondas, Acuras, GMCs, Jeeps, Chryslers, and Cadillacs.

  • On: Filter out all signals 24.168 +/- 2 MHz (Default)
  • Weak: Filters out only weak signals 24.168 +/- 2 MHz
  • Mute: Audibly mute all signals 24.168 +/- 2 MHz
  • Off: Disable K Block 2

K Narrow / Wide / Extended

Adjust the range of frequencies that the R7 scans for on K band.

  • Narrow: Scan for a smaller range of K band frequencies to help cut down alerts from radar signals that are usually false alerts and occasionally legitimate alerts. (24.080 – 24.200)
  • Wide: (Default) Scan for the entire range of K band that police normally use in the US (24.050 – 24.250)
  • Extended: Scan for the entire range of K band that police use in North America, including lower frequency MRCD and Redflex cameras (23.900 – 24.250)

Ka Narrow / Wide / Segmentation

Adjust the range of frequencies that the R7 scans for on Ka band. All of Ka band is very wide so cutting down to a smaller range of frequencies improves the performance of the detector.

  • Narrow: (Default) Scan for a reduced range of Ka frequencies to only the ranges where police radar guns generally operate (33.8 +/- 100 MHz, 34.7 -100 MHz / +150 MHz, 35.5 +/- 100 MHz)
  • Wide: Scan all the possible Ka frequencies where the R7 is capable of scanning for (33.400 GHz – 35.700 GHz)
  • Segmentation: Choose the individual Ka frequency ranges where you’d like the detector to scan for.
    • Ka 1: 33.399 – 33.705 GHz
    • Ka 2: 33.705 – 33.903 GHz (MPH 33.8 radar guns)
    • Ka 3: 33.903 – 34.191 GHz
    • Ka 4: 34.191 – 34.587 GHz (Stalker 34.7 radar guns that drift low)
    • Ka 5: 34.587 – 34.803 GHz (Stalker 34.7 radar guns)
    • Ka 6: 34.803 – 35.163 GHz (Stalker 34.7 radar guns that drift high)
    • Ka 7: 35.163 – 35.379 GHz
    • Ka 8: 35.379 – 35.613 GHz (Decatur & Kustom Signals 35.5 radar guns)
    • Ka 9: 35.613 – 35.701 GHz

Note 1: If you’re wondering where segment Ka 10 is, it’s gone from the R7. To give the R7 the ability to scan down lower on K band, they’ve removed its ability to scan higher up on Ka band. Ka band above 35.600 is virtually non-existent so in general this is a good trade-off. This feature first came on the Net Radar DSP and you can read more about this discussion here.

Note 2: Read this post on RDF to learn which Ka segments to enable in your area.

Ka / MRCD Signal Priority

When detecting multiple signals, how should the R7 prioritize which signal is treated as the primary signal? The primary’s signal will take up most of the display and the audio rampup beeps will be for the primary signal.

  • Ka / MRCD Priority: (Default) Alert priority is based on radar band. If you’re seeing multiple signals, alert priority will be given to Laser, Ka, MRCD, K, & X in that order.
  • MRCD / Ka Priority: Alert priority is based on radar band. If you’re seeing multiple signals, alert priority will be given to Laser, MRCD, Ka, K, & X in that order.
  • Signal Priority: Alert priority is given to the strongest (and likely closest) signal, no matter what frequency or band it’s on. MRCD is always prioritized in this mode, independent of strength.

Note: If you have MRCD turned off, it will only display Ka Priority and Signal Priority.

I prefer Ka / MRCD Priority since legit K band is rare and MRCD is non-existent around here. This way a detector alerts me to a weak Ka band at a distance if I’m next to a speed sign. If you have a lot of K band in use, Signal Priority may be preferred to alert you to stronger / closer K band sources. Legit MRCD is always super close range so if you have that in your area, choose an option that prioritizes MRCD.

Mute Memory Bands

By default, GPS lockouts only apply to X and K band. This makes sense since stationary false alerts coming from automatic door openers and speed signs typically transmit on these two bands. However, if you have fixed false alerts on Ka band (occasionally happens from certain speed signs or even some satellite dishes on homes that transmit on Ka), you can enable GPS lockouts for Ka band as well.

  • X & K (Default)
  • X, K, Ka

Note: Please be aware that locking out Ka band signals can be risky because Ka alerts are almost always legitimate. However, if you are 100% sure that a Ka band source that you keep passing is a false alert, you can enable lockouts for Ka band.

Bonus: If you enable Ka lockouts, you’ll also gain the ability to lock out MRCD alerts.

Auto Mute Mem

These are your automatic GPS lockouts. After you pass a stationary false alert 3 times (over different days with at least 24 hours per pass), the detector will automatically learn these false alerts and mute them for you in the future, automatically adding the signals to your mute memory.

  • On (Default)
  • Off

All Threat Display

Display up to 3 additional signals on the left hand side of the screen, replacing your speed/direction when more than 1 alert is present.

  • On
  • Off (Default)

Color

Choose the primary color of your display. This is helpful if you’d like to match the detector’s display color to match your vehicle’s interior lights. It’s also fun to change on the holidays to make your detector’s display more festive, ie. running red or green during Christmas or amber/orange during Halloween. 🙂

  • Red (Default)
  • White
  • Violet
  • Blue
  • Amber
  • Green
  • Pink
  • Grey

Arrow Color

Choose unique colors for the arrows, depending on the radar band. By default the arrows are always red, similar to a V1, but you can make them different colors depending on if the primary signal is X, K, MRCD, or Ka Band.

  • Red (Default)
  • Blue
  • Green
  • Orange
  • Yellow
  • White
  • Violet

Band Color

Choose the color for when the R7 displays the radar band (X, K, MRCD, or Ka band) on screen.

  • Signal: (Default) The color of the radar band changes as the signal gets stronger, from weak green signals, to medium yellow signals, or to strong red signals.
  • Arrow: The arrow color matches the radar band.
  • Red
  • Blue 
  • Green 
  • Orange
  • Yellow
  • White
  • Violet

Display

Choose what information is displayed on screen when no signal is present.

  • Time
  • Scan: Knight rider style animated scanning bar
  • Mode: (Default) Highway, City, or Advanced mode

Scan Icon

Enable or disable the blinking heart icon on the main screen.

  • Off (Default)
  • On

Display (in Left Box)

Choose what information is displayed in the left box.

  • Speed (Default)
  • Speed + Compass
  • Compass
  • Voltage
  • Altitude

Note: This information is temporarily overwritten when you have the All Threat Display option enabled and you’re detecting multiple signals.

Alert Display

Choose the signal strength meter style on the display.

  • Alert Display #1: (Default) Signal strength bar is a straight line series of dots under the band and frequency.
  • Alert Display #2: Signal strength is an arc-shaped series of dots on top of the band and frequency.

Speed Unit

Choose if distances and speeds are displayed in imperial or metric units.

  • mph (Default)
  • km/h

X / K / MRCD / Ka Band Tone

If you don’t like the default alert tones for the different radar bands, you can choose between 12 different alert tones.

Ka Bogey Tone

Choose which unique alert tone the R7 plays when it detects a new additional Ka signal while alerting to the first Ka signal.

Laser Tone

Choose between one of 12 different alert tones for laser alerts.

Auto Mute

Automatically reduce the volume of an alert after 3 seconds, once it has your attention.

  • On (Default)
  • Off

Auto Mute Volume

If the Auto Mute option is enabled, choose how loud or quiet the detector alerts once it drops down to the auto muted volume level.

  • 0-5 (Default = 2)

Note: If your normal audio volume and auto mute volume are the same, it will “drop” to the same level and seem like the auto mute feature isn’t working. Be sure your auto mute volume level is set lower than your normal alert volume.

Rear K Mute

Mute any and all K band signals back behind you. Side and front K band signals will alert normally. This can be helpful since signals behind are generally less of a threat than signals up ahead so it can be a way to add extra filtering to help quiet down your R7.

  • Off (Default)
  • On

Dark Mode Brightness

When running the display in dark mode, the display will be off (with a blinking dot that slowly moves along the bottom of the screen to let you know the detector is on). When the R7 picks up a signal, the R7 will light up and display all the normal information (as opposed to the “Off” display setting which keeps the display off no matter what.) This “Dark Mode Brightness” option lets you choose how bright the detector lights up when you pick up a signal.

  • Bright
  • Dim
  • Dimmer (Default)

Auto Dim Setting

When you have the display brightness set to Auto, you’ll have the option in the menu to choose how bright or how dark the display is in the daytime or at night.

  • Bright LevelBrightDim
    • Dimmer
  • Dim levelBrightDim
    • Dimmer
    • Dark
    • Off

Note: If you don’t see these options in the menu, make sure your display brightness is set to “Auto.”

Quiet Ride

Low speed muting for X and K band alerts. This is super helpful around town to keep the detector calm and quiet.

  • 5-90 mph in 5 mph increments or 10-140 km/h in 10 km/h increments
  • Off (Default)

Q-Ride MRCD

Choose whether or not MRCD alerts are affected by quiet ride. MRCD photo radar is often run on city roads so you may want the immediate alert for MRCD even if the detector is muting normal radar.

  • Off (Default)
  • On

Q-Ride Beep Vol

Adjusts the volume of the initial alert before the detector is muted with quiet ride.

1 is the quietest, 8 is the loudest. 0 will totally silence the detector altogether for any signals muted by quiet ride.

  • 0-8

Limit Speed

Get an alert when you’re traveling above a preset speed. This can be a helpful reminder to let you know when you’re traveling too fast.

  • Off (Default)
  • 50-100 mph in 5 mph increments or 80-160 km/h in 10 km/h increments

GMT

Select what time zone you are in.

  • GMT-05:00: Eastern Standard
  • GMT-06:00: Central Standard
  • GMT-07:00: Mountain Standard
  • GMT-08:00: Pacific Standard (Default)
  • GMT-09:00: Yukon Standard
  • GMT-10:00: Alaska-Hawaii Standard

DST

Adjust the time for daylight savings time. If you set the time zone, but your clock is off by 1 hour, change this.

  • On
  • Off (Default)

BAT Warning

Alerts you when your battery voltage drops to a low level, below 11v.

  • On
  • Off (Default)

In certain vehicles that have a start/stop system that shuts off the engine at red lights, this warning may go off whenever that system kicks in and so you’ll want to disable it.

BAT Saver

If your R7 is plugged into a power source that is always on, turn this feature on. This way when you’re parked (stationary) or you’re in a parking garage (so you lose GPS), the detector will shut itself off after 1 hour so you don’t kill your car battery.

  • On
  • Off (Default)

Self Test

Plays a sample of the different radar and laser alerts on startup. It doesn’t actually do an internal self-check and it’s more of an audible and visual demo of the different alerts. I prefer turning this off for a quieter and faster startup.

  • On (Default)
  • Off

Factory Reset?

Reset all your settings back to factory default. There’s no options here. Pressing the menu button resets your detector.

Note: All of your GPS lockouts and GPS user marks will remain in place if you reset your detector’s default settings. Clearing your lockouts and marked locations are in the next menu options.

Delete All Mute?

Delete all of your manual GPS lockouts.

There’s no options here. Pressing the menu button clears all of your lockouts.

Delete All Auto

Deletes all of your automatic GPS lockouts.

There’s no options here. Pressing the menu button clears all of your lockouts.

Delete All User?

Delete all of your manually marked GPS locations.

There’s no options here. Pressing the menu button clears all of your user marks.

Note: A shortcut to this option can be found by pressing and holding the Mark button on the side of your detector. This is handy in case you don’t use this feature in the first place and you create a user mark by accident. You can clear your marks this way without waiting until you come back to this location, your detector goes off, and you press the Mark button on the side of your detector to delete that location.

Memory Quota

The R7 supports 2,000 memory locations, split between GPS lockouts and manual GPS user marks. By default the R7 is set up to give you 1,000 of each. Personally I use GPS lockouts all the time and rarely/never use the GPS marks, so I’d rather allocate the available space to GPS lockouts.

In the memory quota section, you can change how many of the 2,000 user points are being used for lockouts or for user marks. You can select up to 1,750 of one which gives 250 remaining for the other, adjustable in increments of 50.

In this image, the detector is set to give us 1750 GPS lockouts and 250 GPS user marks. You can also see the number in parenthesis telling you how many GPS lockouts (200) and how many User Marks (100) you’ve created so far.

You can change how many lockout and mute memory locations are available with the – and + buttons on top of the R7 and this change will be shown in white text. The bottom text in red stays put as your current/previous settings. Press the Menu button up top twice to change to your new settings.

Version

Check which firmware version you’re running.

DB Ver

Displays the date of the redlight cam / speed camera database that you’re running.

Exit

Exit the menu. You can also exit the menu by long pressing the menu button or waiting for the detector to automatically time out.

General Recommended Uniden R7 Settings

Realistically speaking, there are no one set of settings that are appropriate for every person in every area. If there was, there would be no need to have adjustable settings in the first place. 🙂 Nevertheless, here’s a set of generic recommended settings that you can use as a starting point, think about what is appropriate for you, and then adjust as you see fit. As you drive, you’ll naturally get a better sense of how you can further tweak these settings.

  • Menu: Expert
  • Advanced
    • X Band: 100%
    • K Band: 50%
    • Ka Band: 100%
  • Rear Bal: 70%
  • GPS: On
  • Speed Camera: On
  • Speed C Range: 1000ft
  • Redlight Cam: On
  • RLC Q-Ride: 60 mph
  • Voice: On
  • Ka Freq Voice: Off
  • X Band: Off
  • K Band: On
  • Ka Band: On
  • Laser: On
  • K POP: Off
  • MRCD: Off (On in Alberta, Quebec, Chicago, NYC, & MD) (On for CX-5 BSM Filtering)
  • Ka POP: Off
  • K Filter: On
  • Ka Filter: Off
  • TSF: On
  • K Block 1: Weak
  • K Block 2: Weak
  • K Narrow
  • Ka Segmentation: 2/4/5/6/8 (Read what you need for your state.)
  • Ka/MRCD Priority
  • Mute Mem: X & K (Enable K/K/Ka for Ka or MRCD lockouts)
  • Auto Mute Mem: On
  • All Threat: On
  • Color: Red
  • Arrow Color
    • X Band: Red
    • K Band: Red
    • MRCD: Red
    • Ka Band: Red
  • Band Color
    • X Band: Signal
    • K Band: Signal
    • MRCD: Signal
    • Ka Band: Signal
  • Time Display
  • Scan Icon: Off
  • Display: Speed
  • Alert Display: #1
  • Speed Unit: mph
  • X Band Tone: 1
  • K Band Tone: 2
  • MRCD Tone: 7
  • K Band Tone: 1
  • Ka Band Tone: 3
  • Ka Bogey Tone: 2
  • Laser Tone: 4
  • Auto Mute: On
  • Auto Mute Vol: 2
  • Rear K Mute: On
  • Dark Mode: Bright
  • Auto Dim Setting
    • Bright Level: Bright
    • Dim Level: Dim
  • Quiet Ride: 35 mph
  • Q-Ride MRCD: Off
  • Q-Ride Beep Vol: 1
  • LimitSpeed: Off
  • GMT: Set for your time zone
  • DST: On / Off as appropriate
  • BAT Warning: Off
  • Bat Saver: On
  • Self Test: Off
  • Memory Quota
    • Mute Mem: 1,750
    • User Mark: 250

Vortex’s Uniden R7 Settings

Finally, here’s a look at the settings I use myself. I see almost all Ka band out here and K band is very rare, so I like to be pretty aggressive on the K band filtering. X band I disable. MRCD I don’t see in this area, but I have it turned on to help with filtering Mazda CX-5 BSM’s. Then I turn on some additional MRCD filters to address the MRCD false alerts. These settings may or may not be appropriate for you and your area, but here’s a look at how I currently run my R7.

  • Menu: Expert
  • Advanced w/ K band at 60% or City
  • Rear Bal: 70%
  • GPS: On
  • Speed Camera: On
  • Speed C Range: 1000ft
  • Redlight Cam: On
  • RLC Q-Ride: 60 mph
  • Voice: Off
  • Ka Freq Voice: On
  • X Band: Off
  • K Band: On
  • Ka Band: On
  • Laser: On
  • K POP: Off
  • MRCD: On
  • Ka POP: Off
  • K Filter: On
  • Ka Filter: Off
  • TSF: On
  • K Block 1: Weak
  • K Block 2: Weak
  • K Narrow
  • Ka Segmentation: 2/4/5/6/8
  • Ka/MRCD Priority
  • Mute Mem: X K Ka
  • Auto Mute Mem: On
  • All Threat: On
  • Color: Red
  • Arrow Color
    • X Band: Red
    • K Band: Yellow
    • MRCD: Red
    • Ka Band: Blue
  • Band Color
    • X Band: Signal
    • K Band: Signal
    • MRCD: Signal
    • Ka Band: Signal
  • Time Display
  • Scan Icon: Off
  • Display: Spd+Comp
  • Alert Display: #1
  • Speed Unit: mph
  • X Band Tone: 1
  • K Band Tone: 2
  • MRCD Tone: 7
  • Ka Band Tone: 3
  • Ka Bogey Tone: 5
  • Laser Tone: 4
  • Auto Mute: On
  • Auto Mute Vol: 2
  • Rear K Mute: On
  • Dark Mode: Bright
  • Auto Dim Setting
    • Bright Level: Bright
    • Dim Level: Dim
  • Quiet Ride: 35 mph
  • Q-Ride MRCD: On
  • Q-Ride Beep Vol: 0
  • LimitSpeed: Off
  • GMT: -8 Hour
  • DST: Off
  • BAT Warning: Off
  • Bat Saver: Off
  • Self Test: Off
  • Memory Quota
    • Mute Mem: 1,750
    • User Mark: 250

That’s it for now! Please let me know if you have any questions.

If you still need to pick up an R7, you can buy your R7 here.

Thank you for reading. 🙂

This website contains affiliate links.

Click here to read my affiliate disclosure.