Radar Detector Hardwire Cable Options

If you’d like to hardwire your radar detector for a professional and clean looking install, you’ve got a number of radar detector hardwire cable options. These are special cables that replace your cig. lighter cable and instead use your fuse box or some other hidden power source for power, leading to a much better looking setup.

Radar Detector Hardwire Cable: Max360 hardwired in Miata

When it comes to selecting a hardwire cable, you’ve got everything from your standard basic cable that just provides power, cables that add remote mute buttons, or even cables that plug into unique locations like your rearview mirror. Let’s take a look at what your different options are.

Note: I have tutorials available to help you install these power cables. If you go for a traditional hardwire cable, read my Radar Detector Hardwire Tutorial. If you go for a rear view mirror based hardwire cable, watch my MirrorTap Tutorial.

Radar Detector Hardwire Cable Options

Standard Cable: Power Only, $10

Standard Radar Detector Hardwire Cable

This is the most simple radar detector hardwire cable you can get. One end wires into your car for power, the other end plugs into your radar detector. That’s it.

This type of cable is your traditional and most popular option. It’s inexpensive, simple, and does the job with no fuss.

Compatible with: Escort, Valentine, Uniden, Radenso

Purchase the Standard Directwire Cable for $10.

Escort Directwire Smartcord: Add a Mute Button & LED’s, $35

Escort Directwire Smartcord

This is the same idea as before except now also get an additional remote mute button plus alert LED’s. If you like the idea of the standard radar detector hardwire cable, but you’d like to have a convenient mute button so you don’t have to reach up and hit the mute button on your detector every time, this is a helpful option. Just install the control module somewhere within arm’s reach.

The Smartcord also has a pair of LED’s, one for power and a second that blinks when you’re getting an alert. That way even if you can’t hear your detector, you can still see the LED and get notified when you’re getting an alert.

There’s two versions of this cable with different colored LEDs. The first has a red alert light and green power light. The second has a yellow alert light and a blue power light. Otherwise they’re the same. Choose the color combo that matches your car or what you feel looks better.

Note: Though the power connector may fit other brand detectors like Uniden, the mute button and alert functionality won’t work properly. There are similar options for other brands of detectors.

Compatible with: Escort, Beltronics

Purchase the Directwire Smartcord for $35

Uniden Smart Hardwire Cord: Add Mute button and LED, $30

If you run a Uniden brand radar detector and you’d like a hardwire cord with a remote mute button and external alert LED, there is now a Uniden-specific smart hardwire cord.

Uniden Smart Hardwire Cord

The mute button lets you remotely mute your detector or manually lock out false alerts. You can also use it to change the display brightness when no alert is present.

When you get an alert, the alert LED will light up and blink. The stronger the alert, the more rapid the LED will blink, just like the cig. lighter cord that the detector comes with.

Purchase the Uniden Smart Hardwire Cord for $30

Radenso Direct Wire Power Cord

Radenso Radar Detector Hardwire Power Cable

Radenso’s detectors use a variety of different power cable connectors so depending on the model you run, you’ll need a different hardwire cable.

Radenso XP, power only cable ($20)

Radenso Pro M, power only cable ($20)

Radenso DS1, power & remote mute button ($35)

Valentine 1 Direct Wire Adapter, $19

V1 Direct-Wire Hardwire Adapter

If you use a Valentine 1, it actually comes with a directwire adapter as part of the package.

This adapter has two ports, one for the V1 and another for an accessory like a concealed display.

The power cable is actually compatible with other brands of detectors too from Escort, Uniden, and Radenso and so this is what I use in my personal vehicle.

If you don’t have your direct wire adapter already or you lost your original one, you can buy a new one here for $19.

Savvy: Power for Valentine 1 from OBD-II Port, $69

Savvy V1 Hardwire Cable

Another option you have to power your V1 is Savvy. Rather than wiring into your fuse box somewhere, you can plug your V1 into your vehicle’s OBD-II port. It makes for an even easier installation, plus Savvy will be able to read your vehicle’s speed and mute your V1 when you’re traveling below a pre-set speed, effectively giving you low speed muting without requiring GPS.

You can now get this similar functionality using your phone’s GPS and running and app, but this is an alternative that doesn’t require a phone or an app.

One advantage it has is it doesn’t rely on GPS so it works even in parking decks and in tunnels, plus it works even if you don’t want to fire up your cell phone app.

Purchase Savvy here for $69.

MirrorTap: Power from Rear View Mirror, $30

Mirrortap RVM Hardwire Cable

If you’re hanging your radar detector next to your rearview mirror or underneath it with something like a Blendmount and you have a powered rearview mirror (autodimming, compass, garage door opener, etc.), one really convenient idea is to get a MirrorTap. It’s a short power cable designed to plug directly into your powered rearview mirror and then power your radar detector that way. No running cables through your car or messing around with the fuse box required.

Compatible with: Escort, Valentine, Uniden, Radenso

Click here to buy a MirrorTap for $30.

MirrorTap MTX: Upgraded Power Cable Tapping into RVM, $47

Mirrortap RVM Hardwire Radar Detector Cable

There’s an upgraded version of the MirrorTap that I really like called the MirrorTap MTX. It’s essentially a traditional MirrorTap with different sized swappable tips so that you can more easily find the one that best fits your RVM. It’s hard to know which size connector you need when initially buying and if you purchase the wrong size, it either won’t fit (too big) or will fall out (too small) and so you’ll have to exchange the cable altogether and try again. Having a few different sized tips available makes it so you know you’ll have the right size you need.

I’ve also found it beneficial because it’s easy to bend or break the connectors during installation, especially the smaller and thinner ones, and in case it happens (it happened to me! whoops..), you can fall back to using a different sized connector as a backup.

Additionally, when you’re probing around behind your rear view mirror with your multimeter to find where to plug in your MirrorTap, chances are your multimeter’s probes will be too big and fat to fit into the teeny connectors behind your RVM. You can use the removable tips from the MirrorTap to probe into the RVM’s power connector and then connect your multimeter to the other side of these tips (though you could do the same thing with some extra wire lying around the house) and so for the installation process, I find this power cable to be very helpful. It’s more expensive for the upgraded MTX version of the MirrorTap, but I think it provides an excellent upgrade in convenience.

Compatible with: Escort, Valentine, Uniden, Radenso

Click here to buy a MirrorTap MTX for $47.

This website contains affiliate links and I sometimes make commissions on purchases. All opinions are my own. I don’t do paid or sponsored reviews.

Click here to read my affiliate disclosure.

Permanent link to this article: https://www.vortexradar.com/2016/02/radar-detector-hardwire-cable-options/

17 comments

Skip to comment form

    • Alan S. on May 4, 2017 at 10:05 pm
    • Reply

    On your site, it shows the Radenso Pro & SE hardwire at $10. The link goes to Radenso’s site and it is $17.95.

    1. Thanks for the heads up. I’ve updated my article.

    • Rick on April 8, 2018 at 1:31 pm
    • Reply

    I have an older Escort Redline, since I live in Virginia. My wife has grown tired of the false K-band alerts to the point that it dives her crazy. I’m planning to get a Uniden R3 to replace it and give the Redline to my son.

    Question: I’ve got a sticky (semi-permanent) Mount I got from eBay, and a hardwired connection for the Redline. I looks like the R3 will fit the current mount and power connection. Is that correct, or do I need to change anything?

    1. The power cable will work, but the windshield mount won’t fit.

        • Rick on April 10, 2018 at 5:02 pm
        • Reply

        Many thanks!!!

    • Sloan Lohse on August 27, 2018 at 2:43 pm
    • Reply

    My vehicle was hard wired for a Beltronics RX65 with smart button custom cut into dash, and I decided to move my Valentine 1 to this vehicle. As you indicated above, when using the Beltronics smart hard-wire cable, the lights on the button flicker and the mute doesn’t work. I was hoping there was a way I can fabricate a short adapter plug that would correct the wiring connections so the lights and mute button would work as they should?
    I have hunted extensively for wiring diagrams for both units with no luck. Perhaps this already exists?
    Or I would even be willing to cut and re-wire the connector at the radar unit if I had anything to go by on how it needs to be re-wired…
    Hoping you can help, or point me in the right direction.
    Thanks,
    Sloan

    • Mark on December 30, 2018 at 8:11 pm
    • Reply

    Wish someone make a mirror-tap smart cord with the blue LED and reset button compatible with the Escort detectors. I have the 9500ix on a GoPro mount on my windshield, next t o the mirror.

    Taping into the rear-view mirror connector and having around 10-12″ of cable and the RJ11 connector sharing the cable with a small box holding the reset button and LED for hook-N-loop fastening would be PERFECT!

    But no one offers it. Uniden comes close – but no joy.
    Just a simple cable with taps and the RJ11 connector is all I can find.

    • Brian on January 25, 2019 at 8:57 am
    • Reply

    Will the SAVVY work on a Uniden R1 detector? is the SAVVY only powered when the vehicle is turned on? I have a 2018 Porsche Macan S. Thx

    1. It will work to power the detector. I used to run Savvy to power many other brand RD’s for years until I started getting weird conflicts with Escort detectors and muting. It’s been a while since I’ve done it, but I think you should be okay with that combo.

    • Brian on January 25, 2019 at 10:55 am
    • Reply

    Does the SAVVY turn off with the vehicle or does it remain “Hot”?
    I’m looking for a simple non-evasive approach to powering my new R1. Any issues with this approach? Thx

    1. It generally depends on the vehicle. I believe most do turn off.

    • Julie on February 28, 2019 at 3:10 pm
    • Reply

    I’m wanting to buy the Uniden DFR7 with a rear-view mirror tap, but would like to confirm the type of power cord used. The Uniden website manual download lists it with a RJ45 connector, but all accessories Amazon suggests to buy with the DFR7 are RJ11. I called Uniden, but they could only tell me what the manual had listed. I have read in many forums that it is a RJ11 and the manual is misprinted. I just would like to confirm with someone who has actually had their hands on one. So, RJ45 or RJ11?

    1. It’s RJ11. RJ45 is the larger plug used for ethernet cables. RJ11 is the smaller plug used for phone cables and radar detectors. You can get a compatible MirrorTap cable here: https://geni.us/MirrorTapMTX-VR

    • Pete Williams on March 24, 2019 at 8:11 am
    • Reply

    Where can I get a car charger for a Uniden R3 , Not the spring coil like charger , just a straight wire charger ?

    • John on October 25, 2019 at 7:59 pm
    • Reply

    Hi I am awaiting my R3 and Blendmount, missed your offer, but want to make my own RJ11 hard-wire to fuse box connection. Do you know which pin on the RJ11 connector is the hot pin and the ground?

    1. Not of the top of my head, but you should be able to verify easily with the cig. lighter power cable and a multimeter. 🙂

    • John on October 26, 2019 at 1:31 pm
    • Reply

    I figured that out just as I hit the send button,,duh,,, thank you.
    Great site!

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.